| Electric Actuators |
|
|
|
|
|
BELIMO ELECTRIC ACTUATOR -
DIRECT COUPLED MOUNTING
|
BELIMO ELECTRIC ACTUATOR -
FACE MOUNTING
|
- Motor is mounted on a mounting bracket attached to the damper's 4" frame.
|
- Motor is mounted on a mounting bracket.
- Other accessories required are: TAMCO Face Blade Bracket - 2 ball joints - push rod and crankarm
|
|
|
|
BELIMO ELECTRIC ACTUATOR -
JACKSHAFT MOUNTING
|
|
|
|
|
|
|
| Pneumatic Actuators |
|
|
|
|
PNEUMATIC - DIRECT
COUPLED
|
PNEUMATIC - FACE
MOUNTING
|
|
|
|
PNEUMATIC - JACKSHAFT MOUNTING
|
- Pneumatic motors must be installed and aligned so as to ensure proper rotation of the clamp or crankarm. Damper drive rod must not be subjected to pressure that may bow or bend the rod out of line.
- Each pneumatic actuator requires accessories which are specific to its type, or model, or brand. The accessories are necessary to mount the pneumatic actuator to the TAMCO damper hexagonal drive rod, or to the TAMCO jackshaft. Verify, or consult with the actuator manufacturer for a list of appropriate accessories.
- TAMCO can supply face blade brackets, which fit the TAMCO damper U-bolt. If a face blade bracket is required, it must be specified at the time the order is placed.
|
|
|
