Applications:

• For space restrictive installations.
• Modulating, or 2 position control dampers.
• Ideally suited for coastal climates.
• Recommended for inland applications, where tire spray from winter-salted roads have been known to corrode dampers installed in close proximity to roads or highways.
• Caution: In applications where the humidity level is unusually elevated, or where there are extremely high levels of dust and dirt particles, we recommend that the damper linkage and bearing system should be cleaned once a year. This can be done easily with the use of a domestic strength steam cleaner. The loosened dirt and water droplets can then be blown out with compressed air.

• Standard blade depth is 4” (152 mm).
• Added features of these models enhance resistance to salt water, or environments where there is salt in the air.
• Type 316 stainless steel replaces all parts that are zinc-plated, steel hardware of SERIES 1400.
• All aluminum parts are anodized to a depth of 0.7 mil. (18 microns).
• Blade gaskets and side seals are provided in silicone.
• Have all the advantages of aluminum construction, and maintenance-free operation.
  (Caution: Never use any lubricants, such as grease or silicone on TAMCO dampers.)